AutoMax After-Market Auto Accessories

Resources : Colors & Installation

Extensive Color Finishes.

The Benevento finishes are made from three main primary raw materials

Real woods line: These are hand selected for their beauty and characteristics and sliced into a micro thin veneer which is then attached to 3M tape via an applicator to ensure maximum adhesion. These selected color veneers are then laser cut on one of the laser beds to the chosen pattern, such as a Toyota FJ Cruiser, Chevy Tahoe or VW Jetta, etc. Each pattern is cut using a precise CAD/CAM pattern to ensure an OEM look and fit for the finished product. After cutting, the surface is prepared and finished with a high luster crystal clear urethane pour that magnifies and brings out the fine beauty of the wood characteristics. It is then cured for 24 hours and inspected 3 times to ensure a perfect finish before packing and preparation for shipment.

The carbon fiber line begins life as an actual fabric that is specially woven in real carbon or Kevlar. These are the same materials as used in bullet proof vests and on the space shuttle. These are then frozen into a sheet and followed by the same process as in the wood veneers to create our unique dash interior trim kit.

The synthetics line is made up of actual prints that have taken the best attributes of the wood and then applied to a thin sheet of ABS material. Film and base are permanently bonded via a heat transfer process to create a sheet that can then be processed the same way as the other two finishes.

Please Note : Due to variations in monitor settings, the color samples may differ slightly in shade from what you see on this monitor screen

Welcome to our wonderful world of finishes

Standard Colors

Black Onyx Code : BX	Brushed Aluminium Code : BA	Brushed Aluminium Raw Code : BAW	Butter Scotch Code : BUT	California Walnut Code : CAL
Carbon Fiber Look Code : SC	Cherry Birdseye Code : CHR	Cherry Rosewood Code : SR	Chrome Code : CH	Coffee Burlwood Code : COF
Deville Code : DEV	English Burlwood Code : EB	Grey Burlwood Code : GY	Grey Zebrano Code : GZ	Indian Rosewood Code : IR
Infinity Birdseye Code : INF	Liquid Chrome Code : LC	Mandarin Teak Code : MAN	Maple Leaf Burlwood Code : MAP	Olive Ash Burlwood Code : OLV
Oxford Burlwood Code : OB	Pewter Wave Code : PW	Piedmont Burlwood Code : PB	Regal Code : RE	Regency Burlwood Code : REG
Rose Zebrano Code : RZ	Sycamore Burlwood Code : SYC	Voodoo Solid Blue Code : VOB	Western Burlwood Code : WES

Premium Colors

African Zebrawood Code : AFZ	Andes Rosewood Code : R	Aurora Burlwood Code : AB	Blue & Black Carbon Fiber Code : BBC	Blue Carbon Fiber Code : BC
Camphor Burlwood Code : CAM	Carbon Fiber Code : CF	Gs Dark Code : GSD	Platinum Code : PLA	Purple Carbon Fiber Code : PC
Red & Black Carbon Fiber Code : RBC	Red Carbon Fiber Code : RC	Silver Carbon Fiber Code : SIL	Sky Blue Carbon Fiber Code : SKY	Tribal Flames Code : FL
Yellow Carbon Fiber Code : YC

Installation

Pre-Installation

1. Check the part number and make sure you are installing the proper kit. Check the year, make and model of the car and also see that the trim is the correct type. 2. Check that your kit is complete by matching the parts against the schematic included in your dash kit. 3. Test place the pieces in their respective areas. This will help you locate the correct target area and align the piece properly, especially around switches and controls. Please make sure that when installing the kit it is at least 65 degrees Fahrenheit or more. (This is to ensure proper adhesion.) 4. Now follow the Installation steps below - click on the headings to see the steps.

1. Cleaning

2. Preparation

3. Fitting

4. Final Inspection - Enjoy